PBR102-F

PBR102-F PHOTO BIOREACTOR SYSTEM

UPGRADED PHOTO BIOREACTOR WITH FSL200 FULL SPECTRUM LIGHT

Production, Research & Teaching Tools for Real Results Reproduce accurate algal field results in the lab using the New FSL-200 Light System

The PBR102-F™ is the next generation indoor photo bioreactor for outdoor algae production ponds, large-scale bioreactors, and teaching tools for algae laboratories. The PBR102-F is a fully programmable instrument that includes the FSL200 Full Spectrum light that simulates the colors of sunlight and promotes algae growth.

Scientists use a PBR102-F Matrix for:

  • Production pond optimization
  • Algae strain selection, development and discovery
  • Production pond simulation
  • Production pond troubleshooting
  • CO2 Sequestration research
  • Algae water treatment optimization
  • Large photo bioreactors
  • Nutraceuticals applications

Controllable Variables

PBR102-F™ is controlled by Algal Command™ software that allows the user to control and view data charts for:

  • 24 hr. Temperature cycles
  • 24 hr. Diurnal light cycles
  • CO2 input rate (or other gasses)
  • Set pH sampling schedule + control
  • Set stir motor speed
  • Schedule Optical Density sampling to control turbidity
  • Culture media temperature

Specifications

PBR102-F System Specifications:

  • FSL200—Full Spectrum light with variable intensity: <5000 μmol photons m-2 s-1
  • Optical Density Sensor —relative growth output
  • Culture Vessel: 700 mL, 150-650 mL working volume
  • Control Temperature: 10—50°C
  • Dimensions: H-558mm, W-241mm, D-317.5mm, (H-22”, W-9.5”, D-12.5”)
  • Weight: 7.5 kg (17lbs)
  • Power Consumption: 325Watts

Light Spectrum

  • Specifications

    • Culture Vessel: 700 mL, 150-650 mL working volume
    • FSL200—Full Spectrum light
    • Side Optical Density Sensor—relative growth output
    • Culture Vessel: 700 mL, 150-650 mL working volume
    • Control Temperature: 10—50°C
    • Variable Intensity Light: ≤ 5000 μmol photons m-2 s-1
    • Dimensions: H-558mm, W-241mm, D-317.5mm, (H-22”, W-9.5”, D -12.5”)
    • Weight: 7.5 kg (17lbs)
    • Power Consumption: 325Watts
    • Voltage: 110-120V/220-240V 50/60 Hz
    • Heat output: 470 BTU/h
  • Software Features

    Production, Research & Teaching Tools for Real ResultsPBR102-F™ is controlled by Algal Command™ software that allows the user to control and view data charts for:

    • 24 hr. Temperature cycle
    • 24 hr. Diurnal light cycles
    • CO2 input rate
    • Set pH sampling schedul
    • Set stir motor speed
    • Schedule optical Density sampling
    • Culture water temperature

    The Phenometrics Algal Command™ software enables remote, programmable adjustment of key parameters of the culture’s environment:

    • Variable light intensity up to full sunlight (≤ 5000 μmol photons m-2 s-1)
    • Ability to control and adjust light and temperature over diurnal cycles
    • Ability to measure and control pH
    • Mixing by magnetic stirrer or bubbling (sparging)
    • Ability to control CO2 and other gasses
    • Continuous measurement of turbidity to estimate growth rates
    • Ability to vary conditions in complex ways by user customized controls
    • Customizable with specialized probes/configurations
  • Scientists use PBR102-F Matrix for

    • Production pond optimization
    • Algae strain selection, development and discovery
    • Production pond simulation
    • Production pond troubleshooting
    • CO2 Sequestration research
    • Algae water treatment optimization
    • Large photo bioreactors
    • Nutraceuticals applications