PBR102-S

PBR102-S PHOTO BIOREACTOR SYSTEM

PHOTO BIOREACTOR WITH STANDARD LED

Designed by scientists for scientists.

The PBR102-S™ is the next generation indoor photo bioreactor for outdoor algae production ponds, large-scale bioreactors, and teaching tools for algae laboratories. The PBR102-S is a fully programmable instrument that includes the original cool white LED (4000K) and can accommodate the FSL200 light as a separate add-on.

Scientists use a PBR102 Matrix for:

  • Production pond optimization
  • Algae strain selection, development and discovery
  • Production pond simulation
  • Production pond troubleshooting
  • CO2 Sequestration research
  • Algae water treatment optimization
  • Large photo bioreactors
  • Nutraceuticals applications

Controllable Variables

PBR102-S™ is controlled by Algal Command™ software that allows the user to control and view data charts for:

  • 24 hr. Temperature cycles
  • 24 hr. Diurnal light cycles
  • CO2 input rate (or other gasses)
  • Set pH sampling schedule + control
  • Set stir motor speed
  • Schedule Optical Density sampling to control turbidity
  • Culture media temperature

Specifications

PBR102-S System Specifications:

  • Standard LED —Cool light with variable intensity: <3000 μmol photons m-2 s-1
  • Optical Density Sensor —relative growth output
  • Culture Vessel: 700 mL, 150-650 mL working volume
  • Control Temperature: 10—50°C
  • Dimensions: H-558mm, W-241mm, D-317.5mm, (H-22”, W-9.5”, D-12.5”)
  • Weight: 7.5 kg (17lbs)
  • Power Consumption: 325Watts

Light Spectrum

  • Specifications

    • Variable Intensity Light: ≤ 3000 μmol photons m-2 s-1
    • Side Optical Density Sensor—relative growth output
    • Culture Vessel: 700 mL, 150-650 mL working volume
    • Control Temperature: 10—50°C
    • Dimensions: H-558mm, W-241mm, D-317.5mm, (H-22”, W-9.5”, D -12.5”)
    • Weight: 7.5 kg (17lbs)
    • Power Consumption: 300 Watts
    • Voltage: 110-120V/220-240V 50/60 Hz
  • Software Features

    PBR102-S™ is controlled by Algal Command™ software that allows the user to control and view data charts for:

    • 24 hr. Temperature cycle
    • 24 hr. Diurnal light cycles
    • CO2 input rate
    • Set pH sampling schedul
    • Set stir motor speed
    • Schedule optical Density sampling

    The Phenometrics Algal Command™ software enables remote, programmable adjustment of key parameters of the culture’s environment:

    • Variable light intensity up to full sunlight (≤ 3000 μmol photons m-2 s-1)
    • Ability to control and adjust light and temperature over diurnal cycle
    • Ability to measure and control pH
    • Mixing by magnetic stirrer or bubbling (sparging)
    • Ability to control CO2 and other gasses
  • Scientists use PBR102s Matrix for:

    • Production pond optimization
    • Algae strain selection, development and discovery
    • Production pond simulation
    • Production pond troubleshooting
    • CO2 Sequestration researc
    • Algae water treatment optimization
    • Large photo bioreactors